5-481
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcppeers
dspxgcppeers
To display all the User Datagram Protocol (UDP) peer ports used by the Simple Gateway Control
Protocol (SGCP) or the Media Gateway Control Protocol (MGCP), use the dspxgcppeers command in
the VoIP switching/trunking operating mode.
dspxgcppeers
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the UDP ports used by xGCP are di spla yed:
dspxgcppeers
mgcNumber protocolNumber portNumber
----------- ------------- ----------
1 1 2064
1 2 2427
Related Commands Command Description
cnfxgcppeer Configures the UDP port number used to send gateway-initiated messages to the call
agent.