5-127
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcon
Usage Guidelines Follow standard CLI procedures when using this command.
Examples The following example shows that an LCN 160 connection is configured as CBR, with a peak cell rate
of 20000 cps, a sustained cell rate of 5000 cps, and a maxim um burst rat e of 100 00 cps:
cnfcon 160 20000 1 5000 10000
Related Commands Command Description
addcon Adds a PVC connection between a VISM card and any SM or PXM card.
delcon Deletes a PVC connection between a VISM card and an MGX 8000 Series
platform PXM card.
dspvismparam Displays the current VISM card configuration.