5-183
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfmgcgrpprotocol
cnfmgcgrpprotocol
To configure a call agent redundancy group protocol for a previously configured redundancy group, use
the cnfmgcgrpprotocol command in the VoIP switching/trunking, switched AAL1 SVC, switched
AAL2 SVC, switched AAL2 PVC, AAL2 trunking, VoIP and switched ATM AAL1 SVC operating
modes.
cnfmgcgrpprotocol red-mgc-group protocol-num |quar-persist default-quar del-negated prov-resp
resp-ack disc-proc-enable cancel-grace|
Syntax Description red-mgc-group Call agent redundancy group number. It can be in the range from 1 to 8.
protocol-num Protocol number. It can be one of the following values:
•1 = MGCP 0.1
•2 = SGCP 1.1+
•3 = SRCP 1.0.2
•4 = SGCP 1.5
•5 = MGCP 1.0
•In the range from 6 to 8—as displayed by the dspmgcgrpprotocols
command.
quar-persist (Optional) Sets the quarantine handling method for persistent events. It can be
one of the following values:
•1 = Quarantine persistent events (Default)
•2 = Do not quarantine persistent events
default-quar (Optional) Sets the default quarantine event handling method for each
protocol. It can be one of the following values:
•1 = Step, process (Default for MGCP 1.0)
•2 = Step, discard (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and
SGCP 1.5)
•3 = Loop, process
•4 = Loop, discard
Note Step = one notification command is generated per notification request.
Loop = multiple notification commands are generated per notification
request.
del-negated (Optional)
•1 = Delete events from the previous list which are not present in the current
list.
•2 = Delete events from the previous list, only if the event is present in the
current list with a hyphen (-) as the parameter.
prov-resp (Optional) Enables or disables the sending of a provisional response. It can be
one of the following values:
1 = On (Default for MGCP 1.0)
2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)