5-43
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addsesgrp
addsesgrp
To add a PRI backhaul session group between a VISM card and a call agent, use the addsesgrp command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
addsesgrp group-num set-num mgc-name
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Specify the following:
•The set number to which the group belongs.
•The call agent the group’s sessions are to be associated.
Examples The following example shows that the PRI backhaul session group 2 is added between the VISM card
and the Jack call agent to session set number 1:
addsesgrp 2 1 Jack
Related Commands
group-num Identifying session group number in the range from 1 to 16.
set-num In the range from 1 to 8.
Note Currently, only session set number 1 is supported.
mgc-name Domain name of the call agent, a text string from 1 to 64 alphanumeric characte rs.
Command Description
delsesgrp Deletes a PRI backhaul session group.