5-350
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspgwstate
dspgwstate
To display the current user-configured service state of the gateway, use the dspgwstate in the VoIP
switching/trunking operating mode.
dspgwstate
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines The following possible states are displayed by this command:
•Admin States:
–
In service
–
Command out of service
–
Pending out of service
•Operational States:
–
Alarm
–
OK
Examples The following example shows that the user-configured ga teway serv i ce s ta t es—t h e co mmand o u t o f
service administration state and the alarm operational state—are displayed:
dspgwstate
Admin State : Command_Out_Of_Service
Oper. State : Alarm
Related Commands There are no related commands.