5-425
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsess
dspsess
To display configuration data about all Primary Rate Interface (PRI) backhaul sessions, use the dspsess
command in the VoIP switching/trunking operating mode.
dspsess
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the current PRI backhaul sessions are disp laye d:
dspsess
Related Commands Command Description
addses Adds a PRI backhaul session between a VISM card and a call agent.
delses Deletes a PRI backhaul session.
dspses Displays the configuration data of a PRI backhaul session.