5-44
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addsesset
addsesset
To add a PRI backhaul session set between a VISM card and a call agent, use the addsesset command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
addsesset set-num fault-tol-enable
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines The set-num argument value must be set to 1.
Examples The following example shows that the PRI backhaul session set number 1 is added between a VISM card
and a call agent:
addsesset 1
Related Commands
set-num In the range from 1 to 16.
Note Currently, only session set number 1 is supported.
fault-tol-enable Enable or disables fault tolerance. It can be one of the following values:
•1 = Yes
•2 = No
Command Description
delsesset Deletes a PRI backhaul session set.