5-400
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsprsvpreqs
dsprsvpreqs
To display all Resource Reservation Protocol (RSVP)-known requests on the current VISM card, use the
dsprsvpreqs command in the VoIP switching/trunking and VoIP and switched ATM AAL1 SVC
operating modes.
dsprsvpreqs
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and VoIP and switched ATM AAL1 SVC
Usage Guidelines A request is a generated outgoing reservation message. Use the dsprsvpresvs command to display
incoming or locally created reservations.
Examples The following example shows that the RSVP-known request on the current VISM card is displayed:
dsprsvpreqs
Sess Resv From To Prot DPort SPort Interval Serv BPS
-----------------------------------------------------------------------------------------
0 0 11.11.11.1 12.12.12.1 IP 49152 49152 30000 Guaranteed 96000
Related Commands Command Description
cnfrsvp Configures RSVP for a specified connection.
cnfrsvprefreshmiss Configures the number of times VISM waits for a missed RSVP minimum
refresh message for a specified connection.
dsprsvpif Displays the RSVP status of a specified connection.
dsprsvpreq Displays the data associated with a specified RSVP request.
dsprsvpresv Displays all data associated with an RSVP bandwidth reservation.
dsprsvpresvs Displays all incoming RSVP-known reservations on the current VISM card.
dsprsvpsender Displays all data associated with a specified RSVP path st ate .
dsprsvpsenders Displays all RSVP-known path states on the current VISM card.