5-312
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcasparamsource
dspcasparamsource
To display the currently configured timer source parameters fo r ch an ne l as soc iat ed sig n ali ng ( CA S) of
a specified endpoint, use the dspcasparamsource command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
dspcasparamsource endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CAS parameter source f or e ndp oint n umb er 1 is d i splay ed:
dspcasparamsource 1
Ds0IfIndex: 1
CasParameterSource: MibValue
Related Commands
endpt-num Endpoint number for which you want to display the CAS parameter source.
It can be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144
Command Description
cnfcasparamsource Configures an endpoint’s CAS-related timer parameters source.