5-154
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfjtrinitdelay
Examples The following example shows that the jitter buffer size is set to 70 milliseconds:
cnfjtrinitdelay 70
Related Commands
1. The G.723.1 codecs are supported for VISM-PR
cards and are not supported for VISM cards.
Command Description
cnfjtrmode Sets the jitter delay algorithm to fixed or adaptive.
dspcarddsp Displays all current card level parameters for ECAN and voice compression
DSPs.
dspcodecjtrdelays Displays the configured codec jitter delay modes and associated jitter initial
delays.