5-250
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
deldn
deldn
To delete a domain name, use the deldn command in the VoIP switching/trunking and switched AAL2
PVC operating modes.
deldn domain-name-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines If the domain name you want to delete is the last entry in the domain table and if the domain name exists
in the list of call agents that VISM maintains (as displayed by the dspmgcs command), deletion is not
allowed.
You must manually delete all statistically provisioned IP addresses for the d omai n name b efo re you can
delete the domain name.
You should not delete a domain name if it is used as one of the following:
•Media Gateway Controller (MGC)
•Trivial File Transfer Protocol (TFTP) server
•Domain name server (DNS)
•Announcement server
Examples The following example shows that the domain name represented by domain name number 12 is deleted:
deldn 12
Related Commands
domain-name-num Domain name number. It can be in the range from 1 to 11.
Command Description
adddn Adds a domain name (call agent name) and optionally configures the
resolution type of the domain name.
adddnip Adds the IP addresses for a domain name that you added by usin g the adddn
command.
cnfdn Configures the resolution type of a specified domain name.
cnfdnssrvr Designates a domain name as a DNS.
deldnip Deletes a statistically provisioned IP address of a domain name.
dspdnallips Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
dspdnips Displays all statistically provisioned and externally resolved IP addresses
configured for a specified domain name.
dspdns Displays the configuration data of all domain names of a call agent.
dspdnssrvr Displays the domain name of the configured DNS of the current VISM card.