5-287
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspalms
dspalms
To display the alarms for a specified VISM card line type, use the dspalms command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspalms line-type
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the alarms for the T1 line type are displayed:
dspalms -ds1
Line AlarmState StatisticalAlarmState
---- ----------- ---------------------
5.1 No Alarms No Statistical Alarms
5.2 No Alarms No Statistical Alarms
5.3 No Alarms No Statistical Alarms
Related Commands
line-type Line type, -ds1 = T1 or E1 lines.
Command Description
dspalm Displays the alarms associated with a specified line.