5-313
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcastimers
dspcastimers
To display the currently configured chann el ass o cia t ed s ign aling (CAS) timers for a specified endpoint,
use the dspcastimers command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2
trunking operating modes.
dspcastimers endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the currentl y configur ed CA S t im er s f or en dpo in t nu mb er 1 a re
displayed:
dspcastimers 1
Ds0IfIndex: 1
CasOnHookMinMakeTime: 300
CasOffHookMinMakeTime: 20
CasWinkMinMakeTime: 100
CasWinkMaxMakeTime: 1000
CasWinkBreakTime: 20
CasGlareTime: 500
CasGuardTime: 800
CasDialDelayTime: 500
CasFlashMinMakeTime: 300
CasFlashMaxMakeTime: 900
endpt-num Endpoint number for which you want to display the currently configured CAS
timers. It can be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144