5-14
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addcon
Examples The following example adds a master connection as the prima ry channel using AAL2 for bearer traffic.
The local VCI is 160 and the remote end is named node 1 in slot 4, por t 2 w ith a V PI /VCI of 2 23/ 223.
The service type is CBR, the sustainable call rate is 500 cps, and the maximum burst rate is 6000 cells.
addcon 160 1 2 2 1000 1 node1.4.2.223.223 1 500 6000
After you execute this command, a typical local connection ID appears as node 1.5.1.0. 160 , whe re 160
is the added LCN.
Related Commands Command Description
cnfcalea Enables or disables the CALEA feature on the current VISM card.
cnfcon Configures a connection between a VISM card and an MGX 8000 Series platform
PXM card.
cnfconprotect Configures protection on a connection (PVC).
delcon Deletes a connection (PVC) between a VISM card and a Cisco MG X 8 000 Series
platform PXM card.
dspcalea Displays the CALEA feature configuration status of the current VISM card.
dspcon Displays the parameters for a specified channel.
dspcons Displays channel information for all configured connections on a VISM card.
dspvismparam Displays the current VISM card configuration.