5-321
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspccscnt
dspccscnt
To display the common channel signaling (CCS) counter values for a specified line and DS0, use the
dspccscnt command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspccscnt line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CCS counter values for line number 1, DS0 10 are displayed:
dspccscnt 1 10
ds0IfIndex: 10
TxFrameCount: 0
RxFrameCount: 0
RxCRCErrorCount: 0
RxBufOverflowCount: 0
TxUnderflowCount: 0
TxAbortCount: 0
RxAbortCount: 0
Related Commands There are no related commands.
line-num Line number for which you want to display the CCS counter values. It can b e in t he
range from 1 to 8.
ds0-num DS0 number of which you want to display the CCS counter values. It can be a value
from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines