5-7
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addccs
addccs
To add a common channel signaling (CCS) channel (D channel) to a VISM card, use the addccs
command in the switched AAL2 PVC and AAL2 trunking operatin g mod es .
addccs line-num ds0-num lcn
Syntax Description
Command Modes Switched AAL2 PVC and AAL2 trunking
Usage Guidelines To use this command, you must select CCS signaling on the specified line with the cnflnsig command.
When you execute this command, a value called ds0IfIndex is displaye d, whi ch i s used t o ide nti fy t he
CCS channel in subsequent CCS-related commands.
Examples The following example shows that a CCS D channel is adde d to line 1, DS0 20, logical channel number
200:
addccs 1 20 200
Related Commands
line-num Line number of the channel to be added in the ra nge fro m 1 t o 8.
ds0-num DS0 number of the channel to be added. It can be a value from one of the following
ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
lcn Logical channel number of the CCS channel to b e ad de d in t he r an ge from 1 31 to
510.
Command Description
delccs Deletes the association between a CCS (DS0) channel and its corresponding virtual
channel.
dspccs Displays the properties of a previously added CCS channel.