5-375
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplntoneplan
dsplntoneplan
To display the tone plan configuration of a specified VISM card line, use the dsplntoneplan command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dsplntoneplan line-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the tone plan configuration for the current VISM card line number 8
is displayed:
dsplntoneplan 8
LineNum :8
Dsx1TonePlanRegion :singapore
Dsx1TonePlanVersion:11
Related Commands
line-num Line number for which you want to display the tone plan configurat ion. It can
be in the range from 1 to 8.
Command Description
addtoneplan Adds a tone plan to the current VISM card.
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
cnflntonetimeout Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
deltoneplan Deletes a previously added tone plan from the current VISM card.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.
dsplntonetimeout Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
dsptonebuiltinplans Displays all preconfigured (built-in) tone plans on the current VISM card.
dsptoneplan Displays the tone configuration of a specified tone plan—either a
preconfigured (built-in) or user-added tone plan.
dsptoneplans Displays the tone configuration of all tone plans—either preconfigured
(built-in) or user-added tone plans.