5-285
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspalmcnt
dspalmcnt
To display alarm counters and statistics, use the dspalmcnt command in the VoIP switching/trunking,
switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2 trunking, VoIP and switched
ATM AAL1 SVC operating modes.
dspalmcnt -ds1 line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines See the cnfalmcnt command description for a list of the TDM line statistics that are collected and then
displayed by this command.
Examples The following example shows that the alarm counters and statistics for line 1 are displayed:
dspalmcnt -ds1 1
LineNum: 1
lCVCurrent: 0
lCVLast15minBucket: 0
lCVLast24hrBucket: 0
lESCurrent: 0
lESLast15minBucket: 0
lESLast24hrBucket: 0
lSESCurrent: 0
lSESLast15minBucket: 0
lSESLast24hrBucket: 0
cRCCurrent: 0
cRCLast15minBucket: 0
cRCLast24hrBucket: 0
cRCESCurrent: 0
cRCESLast15minBucket: 0
cRCESLast24hrBucket: 0
cRCSESCurrent: 0
cRCSESLast15minBucket: 0
cRCSESLast24hrBucket: 0
sEFSCurrent: 430
sEFSLast15minBucket: 900
sEFSLast24hrBucket: 11699
aISSCurrent: 0
aISSLast15minBucket: 0
aISSLast24hrBucket: 0
uASCurrent: 430
uASLast15minBucket: 900
uASLast24hrBucket: 11696
percentEFS: 100
RcvLOSCount: 1
-ds1 The mandatory line-num argument identifier.
line-num Line number of the T1 or E1 line for which you want to alarm counters and statistics.
It can be in the range from 1 to 8.