5-32
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addmgcgrpprotocol
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines This command allows you to add multiple protocols to the same redundancy group.
Examples The following example shows that call agent redundancy g roup n um be r 3 is assi g ned gat eway control
protocol number 2, SGCP 1.1+:
addmgcgrpprotocol 3 2
Related Commands
resp-ack (Optional) En ables or disa bles sending a response ac knowledgment. It can
be one of the following values:
•1 = On (Default for MGCP 1.0)
•2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)
disc-proc-enable (Optional) Enables or disables the disconnect method, which indicates that
the endpoint has become disconnected and is now trying to esta blis h
connectivity. It can be one of the following values:
•1 = On (Default for MGCP 1.0)
•2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)
cancel-grace (Optional) Enables or disables VISM cancelling a previously issued graceful
restart in progress command. It can be one of the following values:
•1 = On (Default for MGCP 1.0)
•2 = Off (Default for MGCP 0.1, SGCP 1.1+, SRCP 1.0.2, and SGCP 1.5)
Command Description
addmgcgrpentry Configures call agents as part of an MGC redundancy group and assigns a
priority value for a call agent.
cnfdisctimers Specifies the wait delay times for the disconnected procedure, restart in
progress command—initial, minimum, and maximum timer values.
cnfmgcgrpentry Modifies the call agent priority level of a call agent within a call agent
redundancy group.
cnfmgcgrpparam Modifies a call agent redundancy group state change notification policy and
priority level.
cnfmgcgrpprotocol Configures call agent group protocol data.
cnfsrcppeer Configures the SRCP parameters when SRCP is the selected protocol for
communication between the VISM card and call agent.
cnfsrcppeergrpparam Modifies the SRCP heartbeat interval and maximum UDP size for a
specified call agent redundancy group.
delmgcgrpentry Deletes a call agent from a call agent redundancy group.
delmgcgrpprotocol Deletes an MGCP from a specified call agent redundan cy group .
dspdisctimers Displays the Restart in Progress command disconnect type method wait
delay times.