5-200
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfrtpcon
Examples The following example shows that the RTP trunking connection 26 is configured (modified) with
G.726/32 codec type. VISM is also configured to send and receive packets and has a 20-ms packetization
period, a bearer precedence of 3, a bearer ToS of 1, with VAD enabled, and a 400-ms VAD holdover time.
Also, ECAN, CAS, DTMF tone transport, idle code suppression for C ID, and redun da ncy are ena bled:
cnfrtpcon 26 3 3 20 3 1 1 400 1 1 1 1 1
Related Commands Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
addrudptrunk Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflapdtrunkpvc Assigns the PVC trunk type that carries LAPD messages for the curren t VISM
card.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backha ul R UDP
trunk for a specified session.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LA PD.
dsplapd Displays data about an LAPD.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.
dsprtpcnt Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
dsprtpcon Displays the configuration data of a specific static RTP VoIP trunking
connection.
dsprtpconnstat Displays the RTP connection statistics for a specified endpoint.
dsprtpcons Displays the configuration data of all static RTP VoIP trunking connections.
dsprudptrunk Displays the configuration data of a specified ISDN PRI backhaul RUDP
session.
dsprudptrunks Displays the configuration data of all ISDN PRI backhaul RUDP sessions.