5-430
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsrcpcnts
dspsrcpcnts
To display the Simple Resource Control Protocol (SRCP) message counters (statistics) for all known call
agents, use the dspsrcpcnts command in the VoIP switching/trunking operating mode.
dspsrcpcnts
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the SRCP message counters (s tat is ti cs) for al l k nown call ag en t s are
displayed:
dspsrcpcnts
Ip Name Discarded Augw/Fail Auln/Fail Ntfy/Fail Rqnt/Fail
------- -------- --------- --------- --------- --------- ---------
2.2.2.2 mgc1 0 0/0 0/0 0/0 0/0
Related Commands Command Description
dspsrcpcnt Displays the SRCP message counters (statistics) for a specified call agent.
dspsrcppeer Displays the peer configuration data for a specified SRCP peer (call agent).
dspsrcppeers Displays the peer configuration data for all known SRCP peers (call agents).
dspsrcpport Displays the local UDP port number used by the SRCP on VISM.
dspsrcpretry Displays the card level SRCP retransmission parameters—maximum number of
retransmission attempts, minimum timeout, and maximum timeout.