5-333
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspconcnt
dspconcnt
To display counter configuration data (channel state) of a connection, use the dspconcnt command in
the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspconcnt lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the counter configuration data for L CN 1 36 is di sp layed:
dspconcnt 136
ChanNum: 136
Chan State: alarm
Chan XMT ATM State: Sending AIS OAM
Chan RCV ATM State: Receiving AIS OAM
Chan Status Bit Map: 0x6
OAM Lpb Lost Cells: 75599
AAL2 HEC Errors: 0
AAL2 CRC Errors: 0
AAL2 Invalid OSF Cells: 0
AAL2 Invalid Parity Cells: 0
AAL2 CPS Packet Xmt: 0
AAL2 CPS Packet Rcv: 0
AAL2 Invalid CID CPS: 0
AAL2 Invalid UUI CPS: 0
AAL2 Invalid Len. CPS: 0
AAL5 Invalid CPI: 0
AAL5 oversized SDU PDU: 0
AAL5 Invalid Len. PDU: 0
AAL5 PDU CRC32 Errors: 0
Related Commands
lcn Logical channel number for which to display counter configurat ion data. It can be in
the range from 131 to 510.
Command Description
addcon Adds a PVC connection between a VISM card and any SM or PXM card.
delcon Deletes a connection (PVC) between a VISM card and a Cisco MG X 8 000 Series
platform PXM card.