5-332
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspconcac
dspconcac
To display connection admission control (CAC) configuration data for a connection, use the dspconcac
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspconcac lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CAC configuration data for LCN 131 is displ ayed :
dspconcac 131
LCN : 131
MasterShip : Master
Vad Tolerance : 100
Vad Duty Cycle : 61
Rejecton Policy : 3
Carrier Loss Policy : 3
Accepted Connections : 24
Rejected Connections : 0
Effective Cell Rate : 6000 cps
Used Cell Rate : 3200 cps
Available Cell Rate : 2800 cps
Related Commands
lcn Logical channel number for which to display CAC configuration data. It can be in the
range from 131 to 510.
Command Description
cnfconcac Configures CAC on a previously added connection.