5-434
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsrcpport
dspsrcpport
To display the local User Datagram Protocol (UDP) port number used by the Simpl e Re source C ontro l
Protocol (SRCP) on VISM, use the dspsrcpport command in the VoIP switching/trunking operating
mode.
dspsrcpport
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the local UDP port numbe r use d by the SRCP is di spla yed:
dspsrcpport
Related Commands Command Description
dspsrcpcnt Displays the SRCP message counters (statistics) for a specified call agent.
dspsrcpcnts Displays SRCP message counters (statistics) for all known call agents.
dspsrcppeer Displays the peer configuration data for a specified SRCP peer (call agent).
dspsrcppeers Displays the peer configuration data for all known SRCP peers (call agents).
dspsrcpretry Displays the card level SRCP retransmission parameters—maximum number
of retransmission attempts, minimum timeout, and maximum timeout.