5-455
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspvismip
dspvismip
To display the IP address and subnet mask for the current VISM card, use the dspvismip command in
the VoIP switching/trunking operating mode.
dspvismip
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the IP address and subnet mask of the current VISM card are
displayed:
dspvismip
VismIpAddress: 209.165.200.224
NetMask: 255.255.255.255
VismBearerIpAddress: 209.165.200.225
BearerNetMask: 255.255.255.255
Related Commands Command Description
cnfvismip Configures the current VISM card IP address.