5-390
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspmonecanendpt
dspmonecanendpt
To monitor the echo cancellation (ECAN) activity for a specified endpoint, use the dspmonecanendpt
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspmonecanendpt endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the ECAN additivity for endpoi nt num ber 190 is mon ito re d:
dspmonecanendpt 190
Related Commands
endpt-num Endpoint number. It can be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144
Command Description
cnfendptcadence Configures cadence (digit tone) times for an endpoint.