5-329
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcodectmpls
dspcodectmpls
To display all entries in the codec template table, use the dspcodectmpls command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspcodectmpls
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines VISM maintains a table of codec templates; each entry in the table contains the following:
•Codec template number
•Codecs supported
•Maximum number of DS0s supported by the template
Examples The following example shows that all entries in the codec template table are displayed:
dspcodectmpls
codecTemplateNumber codecSupported MaxChanCount
------------------- -------------- ------------
1 0x1ff 145
2 0x23 192
3 0x1ff 120
Related Commands Command Description
cnfcodectmpl Assigns a codec template to a VISM card.
dspcodecparams Displays codec parameters.