5-193
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfprofneg
cnfprofneg
To configure the profile list priority order, use the cnfprofneg command in the switched AAL2 PVC
operating mode.
cnfprofneg codec-priority
Syntax Description
Command Modes Switched AAL2 PVC
Usage Guidelines This command determines which list to use for determining the relative profile preferences.
Examples The following example shows that the codec list priority configuration uses the LCO list first, the remote
SDP data list second, and the local MIB last:
cnfprofneg 1
Related Commands
codec-priority The codec list priority scheme. It can be one of the following values:
•1 = Local connection options (LCO) list, remote Session Descriptor Protocol
(SDP) data list, local MIB
•2 = LCO list, local MIB, remote SDP data list
•3 = Remote SDP data list, LCO list, local MIB
•4 = Remote SDP data list, local MIB, LCO list
•5 = Local MIB, LCO list, remote SDP data list
•6 = Local MIB, remote SDP data list, LCO list
Command Description
dspvismparam Displays the current VISM card configuration.