5-231
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfvoiptimerparam
cnfvoiptimerparam
To configure the holdover time for voice activity detection (VAD) before silence compression is
activated, use the cnfvoiptimerparam command in the VoIP switching/trunking operating mode.
cnfvoiptimerparam vad-timer
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the VAD holdover timer is configured for 360 ms:
cnfvoiptimerparam 360
Related Commands
vad-timer The VAD holdover timer (defined in milliseconds) in the range from 250 to
65535.
Command Description
cnfvoiptransparams Configures the VoIP transportation parameters.
dspvoipparams Displays the VoIP switching/trunking operating mode parameters.