5-396
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsprscprtn
dsprscprtn
To display configuration data about the resource partition which you created with the addrscprtn
command, use the dsprscprtn command in the VoIP switching/trunking, switched AAL2 PVC, and
AAL2 trunking operating modes.
dsprscprtn
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data of the resource partition created with the
addrscprtn command is displayed:
dsprscprtn
vismResPartPortNum: 1
vismResPartCtrlrNum: par
vismResPartRowStatus: add
vismResPartNumOfLcnAvail: 72
vismResPartLcnLow: 32
vismResPartLcnHigh: 279
vismResPartIngrPctBW: 100
vismResPartEgrPctBW: 100
vismResPartCtrlrID: 2
Related Commands Command Description
addrscprtn Adds a resource partition for a virtual port.