5-228
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfvismdn
cnfvismdn
To configure the current VISM card domain name, use the cnfvismdn command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
cnfvismdn domain-name
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Ensure that you configure the same domain name for the VSC as you do for the VISM card.
The domain name you configure is used when you create an e ndp oint i d entificat ion num ber for ea ch
endpoint on a VISM card. The endpoint identification number is used to address SGCP/MGCP
commands to a specific endpoint.
If you do not use this command, the default domain name is used.
Examples The following example shows that the current VISM card is configured with the domain name north :
cnfvismdn north
Related Commands
domain-name Current VISM card domain name. A text string of 1 to 64 a lphanumeric characters.
(Default = cisco.com)
Command Description
cnfvismip Configures the current VISM card IP address.
dspvismdn Displays the domain name of the current VISM card.