5-28
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addln
addln
To add a T1 or E1 line to a VISM card, use the addln command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
addln line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that line number 1 is added to a VISM card:
addln 1
Related Commands
line-num Line number of the T1 or E1 line to be added in the range from 1 to 8.
Command Description
cnfln Configures line characteristics for a specified line.
delln Deletes a DS1 line on a VISM card.
dspln Displays the characteristics of a specified line.