5-391
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspmusicthreshold
dspmusicthreshold
To display the music on-hold threshold values for the current VISM card, use the dspmusicthreshold
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspmusicthreshold
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the current VISM card music on-hold threshold values are displayed:
dspmusicthreshold
LineNo/Ds0No Musicthreshold
------------ --------------
1/1 -38
1/2 -50
.
.
.
Related Commands Command Description
cnfds0musicthreshold Configures the music on-hold threshold for a specified DS0.
cnflnmusicthreshold Configures the music on-hold threshold for all DS0s on a specified line.
cnfmusicthreshold Configures the music on-hold threshold value for the c urren t VISM ca rd.
dspds0musicthreshold Displays the music on-hold threshold value for a specified DS0.
dsplnmusicthreshold Displays the music on-hold threshold values for the DS0s on a specified
line.