5-326
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspco4timer
dspco4timer
To display the bearer continuity test CO4 timer value, use the dspco4timer command in the VoIP
switching/trunking operating mode.
dspco4timer
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the bearer continuity test CO4 timer is set at 1000 ms:
dspco4timer
CO4 timer value: 1000
Related Commands Command Description
cnfco4timer Configures the bearer continuity test CO4 timer value.
dspvismparam Displays the current VISM card configuration.