5-262
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delmgc
delmgc
To delete a call agent from a VISM card’s list of configured call agents, use the delmgc command in the
VoIP switching/trunking and switched AAL2 PVC operating modes.
delmgc mgc-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the call agent identified by the number 3 is deleted:
delmgc 3
Related Commands
mgc-num A number by which the call agent is identified, as displayed by the dspmgcs
command, in the range from 1 to 8.
Command Description
cnfmgcgrpparam Modifies a call agent redundancy group state change notification policy and
priority level.
dspmgcs Displays configuration data on all configured call agents.