5-442
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsptonebuiltinplans
dsptonebuiltinplans
To display all built-in (preconfigured) tone p lans on the curr ent VISM card, use the dsptonebuiltinplans
command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dsptonebuiltinplans
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines VISM supports version 1 of the country and region built-in tone plans listed in Tabl e 5-3.
Examples The following example shows that all preconfigured tone plans for the current VISM card ar e dis played :
dsptonebuiltinplans
Status Tone Plan Region Version Tone Plan File Name
------ ---------------- ------- -------------------
configure ITU 1 BUILTIN
.
.
.
configure United States 1 BUILTIN
Number of Built-In Tone Plans = 48.
Table5-3 VISM Release 2.2(0) Built-in Tone Plans
Tone Plan Name Tone Plan Name Tone Plan Name Tone Plan Name
ITU North America Argentina Australia
Austria Belgium Brazil Canada
China Cyprus Czech Republic Denmark
Finland France Germany Greece
Hong Kong Hungary Iceland India
Indonesia Ireland Israel Italy
Japan Korean Republic Luxembourg Malaysia
Mexico Netherlands New Zealand Norway
Philippines Poland Portugal Russia
Singapore Slovakia Slovenia South Africa
Spain Sweden Switzerland Taiwan
Thailand Turkey United Kingdom United States