5-53
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clralmcnt
clralmcnt
To clear the alarm counters and statistics on a specified VISM line, use the clralmcnt command in the
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
clralmcnt -ds1 line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines All counters are reset to 0 when you use this command.
Examples The following example clears alarm counters and statistics from line 1:
clralmcnt -ds1 1
Related Commands
-ds1 The mandatory line-num argument identifier.
line-num Line number for which to clear alarm counters and statist ics. In the rang e fr om 1 to 8.
Command Description
clralmcnts Clears all alarm counters and statistics on a VISM card.
dspalmcnt Displays the alarm counters and statistics on a line.