5-125
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcompvad
cnfcompvad
To enable or disable voice activity detection (VAD) on a T1 or E1 line, use the cnfcompvad command
in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnfcompvad line-num vad-enable
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures when using this command.
Examples The following example shows that line numb er 3 do es not have VAD enabled:
cnfcompvad 3 2
Related Commands There are no related commands.
line-num Line number of the line on which to configure VAD in the range from 1 to 8.
vad-enable Enables or disables VAD. It can be one of the following values:
1 = On
2 = Off