5-65
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clrtaskinfo
clrtaskinfo
To reset the values displayed by the dsptaskinfo command, use the clrtaskinfo command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
clrtaskinfo
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines When you execute this command, the values are reset to 0 and the collection of the task information
statistics begins again.
Examples The following example shows that values displayed by the dsptaskinfo command are reset:
clrtaskinfo
Related Commands Command Description
dsptaskinfo Displays information about currently operating tasks.