5-263
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delmgcgrpentry
delmgcgrpentry
To delete a call agent from a call agent redundancy group, use the delmgcgrpentry command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
delmgcgrpentry mgc-group mgc-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines The last call agent within a call agent redundancy group cannot be deleted if there are protocols
associated with the call agent redundan cy gr oup .
A call agent redundancy group is deleted when the last call agent ha s bee n delete d f rom a group.
Use the dspmgcgrpparams CLI to verify your configuration.
Examples The following example shows that call agent number 2 is deleted from call agent redundan cy group
number 1:
delmgcgrpentry 1 2
Related Commands
mgc-group Call agent redundancy group number. It can be in the range from 1 to 8.
mgc-num Call agent identification number. It can be in the range from 1 to 8.
Command Description
addmgcgrpentry Configures call agents as part of an MGC redundancy group and assigns a
priority value for a call agent.
addmgcgrpprotocol Associates a call agent redundancy group to a gateway control protocol.
cnfmgcgrpparam Modifies a call agent redundancy group state change notification policy
and priority level.
cnfmgcgrpentry Modifies the call agent priority level of a call agent within a call agent
redundancy group.
cnfsrcppeer Configures the SRCP parameters when SRCP is the selected protocol for
communication between the VISM card and call agent.
cnfsrcppeergrpparam Modifies the SRCP heartbeat interval and maximum UDP size for a
specified call agent redundancy group.
delmgcgrpprotocol Deletes an MGCP from a specified call agent redundancy gr oup .
dspmgcgrpparams Displays all configured call agent redundancy group parameters.
dspmgcgrpprotocols Displays all configured call agent redundancy group protocols.
dspmgcgrps Displays all configured call agent redundancy groups.
dspsrcppeergrpparams Displays the SRCP parameters for all call agent redundancy groups that
have SRCP added.