5-344
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspds0loop
dspds0loop
To display the loopback type for a specified line and DS0, use the dspds0loop command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspds0loop line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the loopback type for line number 1, DS0 number 1 is displayed:
dspds0loop 1 1
ds1 line number: 1
ds0 number: 1
ds0 If Index: 1
loopback value: noLoop
Related Commands There are no related commands.
line-num Line number of the channel for which you want to display the loo pback t ype. It
can be in the range from 1 to 8.
ds0-num DS0 number of the channel for which you want to di spla y t he loop back t yp e. I t
can be a value from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines