5-15
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addconloop
addconloop
To set a cellbus connection to local loopback state on a curr en t c ar d, use the addconloop command in
the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
addconloop lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example places the channel number 132 in loopback state:
addconloop 132
Related Commands
lcn Logical channel number of the CCS channel to be added in the range from 131 to 510.
Command Description
delconloop Deletes a local loopback state on a VISM line.