5-373
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplns
dsplns
To display all line configuration data for the current VISM card, use the dsplns command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dsplns
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for all lines on the current VISM card are
displayed:
dsplns
Line Conn Type Status/Coding Length XmtClock Alarm Stats
Type Source Alarm
---- ----- ------------ ---- -------- --------- -------- ----- -----
17.1 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim Yes No
17.2 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim Yes No
17.3 RJ-48 dsx1ESF Dis/dsx1B8ZS 0-131 ft LocalTim
17.4 RJ-48 dsx1ESF Dis/dsx1B8ZS 0-131 ft LocalTim
17.5 RJ-48 dsx1ESF Dis/dsx1B8ZS 0-131 ft LocalTim
17.6 RJ-48 dsx1ESF Dis/dsx1B8ZS 0-131 ft LocalTim
17.7 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim No No
17.8 RJ-48 dsx1ESF Ena/dsx1B8ZS 0-131 ft LocalTim No No
LineNumOfValidEntries: 8
Related Commands Command Description
addln Adds a T1 or E1 line to a VISM card.
cnfln Configures line characteristics for a specified line.
delln Deletes a DS1 line from a VISM card.
dspln Displays the characteristics of a specified line.