5-487
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
tstcon
tstcon
To test a specified connection, use the tstcon command in the VoIP switching/trunking, switched AAL2
PVC, and AAL2 trunking operating modes.
tstcon lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the connection identified by logical channel number 136 is tested:
tstcon 136
Related Commands
lcn Logical channel number of the connection to be tested. It can be a value in the range
from 131 to 510.
Command Description
tstdelay Tests the delay on a specified connection.