5-114
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcasxgcp
cnfcasxgcp
To configure channel associated signaling (CAS) v arian t retransm ission par ameters, u se the cnfcasxgcp
command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
cnfcasxgcp var-name retrans-time start-retrans-time retrans-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the var1 CAS variant is configured for 100 ms retransmission time,
100 ms initial retransmission time, and up to two retransmission attempts:
cnfcasxgcp var1 100 100 10 2
Related Commands
var-name Name of the CAS variant to be configured with retransmission parameters; a
text string of 1 to 64 alphanumeric characters.
retrans-time The retransmission time (defined in milliseconds). It can be in the range from
10 to 10000.
start-retrans-time The initial retransmission time (defined in milliseconds). It can be in the range
from 10 to 10000.
retrans-num Maximum number of retransmission retries. It can be in the range from 0 to 1 0.
Command Description
addcasvar Adds a CAS variant to a VISM card.
delcasvar Deletes a CAS variant from a VISM card.
dspcasvar Displays information about CAS variants for a given variant name.