ANS9597W program-name:The selected aggregate is still enabled for Data Management!
There are DCE usage restriction on DM enabled aggregateswhich can be
disabled by performing the following steps: 1. dfsexport -detach -aggregate
aggregate name 2. Edit /opt/dcelocal/var/dfs/dfstab and change the filessystem
type of aggregate aggregatename from dmlfs to lfs 3. /usr/lpp/dce/bin/dmaggr
-aggregate aggregatename -off 4. dfsexport -aggregate aggregate name
Explanation: After removing HSM from an aggregate, the DM attribute should be
set to its normal value.
SystemAction: None
User Response: Performthe changes. See manual for details.
ANS9598W The specified aggregate is now enabled for HSM. However,you still have to
define one or more fileset mount points using the VIRTUALMOUNTPOINT
option in order to activate data management.
Explanation: Auser has to define VIRTUALMOUNTPOINTS just like an include
list. Based on this path information, HSM will scan the aggregate for candidates.
SystemAction: None
User Response: SpecifyVIRTUALMOUNTPOINTS for the filesets of an
aggregate which should be activated for data management.
ANS9599W The specified path file path does not match any defined
VIRTUALMOUNTPOINT.
Explanation: Auser has to define VIRTUALMOUNTPOINTs to enable certain
paths for HSM.A VIRTUALMOUNTPOINT is only valid for the corresponding
parent fileset.
SystemAction: None
User Response: SpecifyVIRTUALMOUNTPOINTsin dsm.opt for all the filesets
of an aggregate which should be activated for data management.
ANS9600W The option file does not contain any VIRTUALMOUNTPOINTS foraggregate
DFS aggregate.
Explanation: Auser has to define VIRTUALMOUNTPOINTs just like an include
list. Based on these path information, HSM will scan the aggregate for candidates.
SystemAction: None
User Response: SpecifyVIRTUALMOUNTPOINTsin dsm.opt for the filesets of
an aggregate which should be activated for data management.
1302
Version 3 Release 7