User Response: On the target server,issue the UPDATE NODE command to
change the password. On the source server, issue the UPDATESERVER command
to change the password to match the new password on the target server.Retry the
failing operation.
ANR4373E Session rejected by target server server name, reason:rejection reason.
Explanation: The source server has attempted to open a session with the shown
target server.The session was rejected for the indicated reason.
SystemAction: The operation fails.
User Response: Check both the source server and the target server for any
additional messages that might further describe the reason the session was rejected.
For a reason ofAUTHENTICATION FAILURE, ensure that both the source and
target servers are using the same password. For a reason of NO RESOURCE,
ensure that the target server is enabled, has sufficient DB, LOG, and memory
resource to support the source server session and that the node name of the source
server is not locked or in use. If this is a routed command, check to make sure that
the administator id being used to route the command is not locked or in use. For a
reason of LICENSE FAILURE,ensure that the target server is properly licensed to
support the source server session. For a reason of DOWN LEVEL, ensure that the
target server program is a level new enough to support the source server session.
For a reason of NODE TYPE, the source server is not allowed to establish a session
with the given target server.The NODETYPE on the target server is CLIENT. The
NODENAME parameter of the server definition on the source server is incorrect.
The NODETYPE parameter of the registered node on the target server is incorrect
and should be NODETYPE=SERVER.For a reason of INTERNAL ERROR, use
the messages on the target server to determine the problem and contact your service
representative. Retry the failing operation.
ANR4374E Session failure, source server detected an internal error.
Explanation: The source server ends the session because an internal logic error is
detected.
SystemAction: The source server ends the session and continues operation.
User Response: Todetermine the source of the error, the administrator can
examine server messages issued prior to this message. The QUERYACTLOG
command can be used to view the activity log and search for messages. If the error
cannot be isolated and resolved, contact your service representative.
ANR4375E Session failure, source server has insufficient memory.
Explanation: The source server ends the session because sufficient memory
(virtual memory) is not available.
573
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages