ANR8222W (AIX)TCP/IP driver is unable to set the window size to TCPWindowsizefor the server
master socket. The default value will be used.
Explanation: The server cannot set the window size for the socket on which the
server listens to the requested size shown. The server uses the default window size
for listening for sessions. There may be a lack of memory for TCP/IPbuffers.
SystemAction: Server operation continues with the default window size.
User Response: Restartthe server with a smaller window size in the options file if
necessary.Issue the QUERY OPTION command to determine the setting of the
server TCPWindowsize.
ANR8222W (AS/400)
Failure reason is given in spool file QSYSPRT.
Explanation: TheADSM server cannot communicate by way of TCP/IP. TCP/IP is
not activated.
SystemAction: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IPcommunication protocol.
User Response: Aspool file QSYSPRTprovides the reason.
ANR8222W (Solaris)
Unable to establish TCPconnection - server HALT in progress.
Explanation: The server cannot accept a client session due to server HALT
processing that is in progress.
SystemAction: Server operation continues, but the session request for this session
fails.
User Response: None.
ANR8222W (Windows NT)
TCP/IPdriver is unable to use the TCP/IP NODELAY option for client client.
Explanation: The server cannot set TCP/IPNODELAY for the indicated client.
The session proceeds with TCP/IPDelay processing in effect. This causes TCP/IP to
buffer data prior to sending it to clients.
SystemAction: Server operation continues and the session continues with the
delay processing on.
User Response: Furtherdetails for use in contacting your service representative
can be obtained by issuing the following trace commands from an admin session or
from the server console (proper administrative authority is required): TRACE
826
Version 3 Release 7