ANR8202E (Solaris)
Unable to initialize TCP/IPdriver - socket bind operation for port TCP port
number failed; error error code.
Explanation: The server is unable to initialize the TCP/IPdriver due to a socket
binding error.
SystemAction: Server operation continues, but TCP/IPsupport is inoperative.
User Response: Ensurethat TCP/IP is operational on your system by using the
ping command with your TCP/IPaddress as a target. If TCP/IP is not active on your
system, you must activate it; then halt and restart the server.This message may also
result from more than one server running on the same machine with the same
TCP/IP port number.Make sure that the dsmserv.opt file TCPPort option is different
for each server.
ANR8202W (Windows NT)
Unable to initialize TCP/IP driver - error creating acceptor socket.
Explanation: The server is unable to communicate by way of TCP/IP.TCP/IP has
rejected a request for a socket on which the server listens.
SystemAction: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IPprotocol.
User Response: Ensurethat TCP/IP is operational on your system by using the
ping command with your TCP/IPaddress as a target. If TCP/IP is not started, issue
the HALTcommand to stop the server, and then restart the server.
ANR8203W (AIX)Unable to establish TCP connection - accept error.
Explanation: The server cannot accept a client session due to a failure in TCP/IP.
SystemAction: Server operation continues, but the server cannot accept sessions
from clients using the TCP/IPprotocol.
User Response: Ensurethat TCP/IP is operational on your system by using the
ping command with your TCP/IPaddress as a target. If TCP/IP is not started, use
the HALTcommand from a server prompt to terminate the server and restart it.
ANR8203W (AS/400)
TCPhas run out of buffer space - server will retry when buffer space is
available.
Explanation: TheADSM server cannot send data to clients because no buffer
space is available in TCP/IPdata buffer.
800
Version 3 Release 7