User Response: Tocomplete a database restore where a volume list is specified,
specify COMMIT=YES on the command when restoring the last set of backup
volumes. If you forgot to specify COMMIT=YES on the command, issue the last
restore command again with COMMIT=YES.
ANR4634I Starting point-in-time database restore to date date time.
Explanation: Apoint-in-time database restore with the TODATE parameter
specified has begun. When this restore is complete, the database will be committed
to the point in time of this backup.
SystemAction: None.
User Response: None.
ANR4635I Point-in-time database restore complete, restoredate date time.
Explanation: Apoint-in-time database restore with the TODATE parameter
specified has completed. The database is committed to the point in time of this
backup, which may be different than the TODATEspecified. If this is the case, an
additional message will be displayed.
SystemAction: None.
User Response: None.
ANR4636I Starting roll-forward database restore.
Explanation: Aroll-forward database restore has begun. When this restore is
complete, the database will be returned to its most recent state.
SystemAction: None.
User Response: None.
ANR4637I Roll-forward database restore complete.
Explanation: Aroll-forward database restore has ended. All database backups in
the most current backup series have been restored, and all updates to the database
since the most recent backup have been rolled forward. The database has been
returned to its most recent state.
SystemAction: None.
User Response: None.
604
Version 3 Release 7